Loading...
Serving New Braunfels, TX and surrounding areas. (830) 402-1980
Your garage floor is cracked, flooded, or falling apart - we pour a reinforced slab built for Hill Country clay soil and Central Texas heat so it holds up for decades.
Garage floor concrete in New Braunfels means removing your old slab if there is one, compacting the sub-base to handle local clay soil, placing steel reinforcement, and pouring a flat, durable slab - most single- or two-car jobs wrap up in one pour day after prep work is complete.
Many homeowners put off the job because the floor still feels usable, even when it is cracked and uneven. The problem is that clay soil in New Braunfels keeps moving with the seasons - wet winters, dry summers - and small cracks widen and sections shift apart over time. A fresh garage floor slab, poured with the right base and thickness for your property, stops that cycle.
Once the slab is poured and fully cured, you can keep it as a plain broom-finish surface or upgrade it with a decorative concrete coating. Either way, you end up with a garage that is cleaner, safer, and more functional than what you started with.
When cracks are wide enough to catch your fingertip, the slab has moved - not just settled. In New Braunfels, the expansive clay soil underneath is usually the culprit. Patching only delays the same problem, and sections can keep shifting apart.
Standing water in your garage after a hard rain means the floor has settled unevenly or was never poured with the right slope. New Braunfels gets intense spring thunderstorms, and water sitting against your walls and belongings causes real damage over time.
Concrete that is peeling, pitting, or breaking apart at the surface is past the point of patching. This usually means the original mix or curing was poor. Once spalling starts, it spreads and weakens the whole slab.
If you hear a hollow sound when you tap the floor or feel a slight flex underfoot, the base underneath has eroded or compacted unevenly. This is a sign of structural failure below the surface - not just cosmetic wear.
Every garage floor project starts with an honest look at what is underneath. We assess your sub-base, check drainage, and recommend the right slab thickness for how you use the space - a parking stall for a sedan needs a different spec than a workshop floor holding heavy equipment. For garages that need full replacement, we handle demolition and haul-away of the old concrete so you are starting with a clean slate. If you are interested in a finished surface after the concrete cures, our decorative concrete options include penetrating sealers and epoxy-style coatings that protect against oil, chemicals, and moisture.
For homeowners converting a garage into a living or workspace, we can also tie the garage floor into a broader concrete floor installation project so the surfaces match and drain correctly throughout. We put everything in a written scope before any work begins - no verbal estimates, no after-the-fact add-ons.
Best for homes with a missing or completely failed floor - a full pour from ground up with proper base prep and reinforcement.
For garages with existing concrete that needs to come out - includes demolition, haul-away of old material, and a fresh pour.
After the slab cures, a penetrating sealer or epoxy-style coating protects against oil, stains, and the moisture that comes with Central Texas rain events.
New Braunfels sits at the edge of the Texas Hill Country, where soils shift between shallow limestone and expansive clay. That clay swells when the Guadalupe River watershed gets a heavy spring rain and shrinks back during the long, dry summers. Any slab sitting on top moves with it. Homes built in the newer subdivisions east of I-35 - where the ground is flatter and the clay content higher - tend to see the most dramatic cracking. A garage floor poured without a well-compacted gravel base and proper control joints will not survive more than a few years of those seasonal swings.
The summer heat adds another layer of complexity. Temperatures climb well above 90 degrees from May through September, and concrete poured in peak heat can set too fast, trapping moisture and weakening the surface finish. Homeowners in Seguin and Schertz face the same seasonal challenges, and across all these communities the answer is the same: schedule the pour for early morning in spring or fall, use a hot-weather mix, and give the slab proper cure time before you put any weight on it. That is how a garage floor built in this climate holds up decade after decade.
Tell us the size of your garage and the condition of the existing floor. We will schedule a time to come look at it in person before we ever quote a price.
We measure the space, check the soil and drainage, and confirm thickness and reinforcement options. If a permit is needed, we handle the paperwork with the City of New Braunfels on your behalf.
Old concrete is broken up and hauled away. We compact the sub-base carefully - critical in New Braunfels clay soil - then set forms, place reinforcement, and pour. Summer pours start early morning before the heat compresses the finishing window.
Keep foot traffic off for 24 to 48 hours and vehicles off for about four weeks. Once fully cured, we can apply a sealer or epoxy coating as a separate follow-up visit. We walk you through the finished floor before we leave.
We will come out, assess the slab and soil conditions, and give you a clear written estimate - no pressure and no guesswork. Responses within one business day.
(830) 402-1980Expansive clay is the main reason garage floors crack and shift in this area. We compact the sub-base and size the slab for the specific ground conditions on your property - not a generic spec from a catalog.
New Braunfels summers hit triple digits early and stay there. We start garage floor pours early in the morning and use mix additives suited to hot weather so the surface cures strong rather than setting too fast.
New Braunfels is one of the fastest-growing cities in Texas, and the building department has specific requirements. We check whether your project needs a permit and pull it on your behalf so the job is documented and inspection-ready.
We put everything in writing before work starts: dimensions, thickness, reinforcement, demolition scope, and any finishing work. You know exactly what is included and what the final floor will look like.
A garage floor looks straightforward, but the details - base compaction for local clay, hot-weather mix additives, control joint placement - are what separate a slab that holds for 30 years from one that cracks in three. The National Ready Mixed Concrete Association and the Texas Department of Licensing and Regulation both provide resources to help homeowners hire the right contractor. We welcome that scrutiny.
After your garage slab cures, a stained, stamped, or epoxy-coated finish protects the surface and transforms the space into somewhere you actually want to spend time.
Learn MoreConverting a garage to living space or tying indoor and garage floors together requires coordinated pour depths and drainage - we handle both in a single project.
Learn MoreSpring and fall booking slots fill up fast - contact us now and we will lock in your project before the summer heat makes scheduling tight.